10 best 120v plasma cutter -

With so many options available, you may get overwhelmed to find the best 120v plasma cutter.

At Quickguidepro, we are here to help you!

We have tested dozens of 120v plasma cutter from different brands and evaluated them for construction, protection, materials, and quality-to-price ratio. We also have analyzed the customer reviews and real-time user experiences.

Finally, our team of experts has put together a list of the 10 most popular models.

Read on to find which of these units might be the right fit for your specific needs!

Here is the round-up of our selected 10 best-selling 120v plasma cutter.

Our Recommended 10 Best 120v plasma cutter

No matter which 120v plasma cutter you pick from our list, it will provide you with the best value for your money.

Continue reading to find the top contenders.

Bestseller No. 1

Plasma Cutter, Pilot Arc BTC500DP 7th Generation 50Amps Screen Display Dual Voltage 110/220V Digital Plasma Cutting Machine (BTC500DP 7GEN 110/220V)

[Pilot Arc Function]: BTC500DP 7th plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. Added PA adjustable function, extended pilot arc maintenance time, reduce energy consumption in non cutting work, reduce electrode burning, and extend service life.
[Digital Screen Display]: The screen centrally display parameters such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If plasma cutter cannot work, the screen comes with an error code system, making it easy to find out the problems.
[Sensor of Air Pressure & Air Compressor]: Inside of machine have sensor of air pressure, User can adjust the air pressure through the regulator. The air filter is installed at the rear of the machine with a quick air connector 1/4 NPT, which can be used after opening the box. Users can use it after connecting to the air compressor. Recommended air compressor air pressure value be within the range of 90PSI, 250L/min.
[Cutting Thickness]: Adopting advanced IGBT inverter technology, 50/60Hz high-frequency pilot arc plasma, dual voltage 110/220V, 60% duty cycle. Current display at 110V is 15-35A, Under 220V current display is 15-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 50PSI; 16mm@50A 220V, 60 PSI.
[PT/2T/4T/PA Function]: Post time function, with an adjustment range of 3-15 seconds. Adjust the cooling time of the torch head to extend the service life of consumables. Generally speaking, we recommend a cooling time of 4-8 seconds. 2T/4T automatic cutting release your finger. 2T is semi-automatic cutting control, and 4T is automatic cutting control. PA adjust the time for the pilot arc, longer seconds good at cutting mesh metal, short seconds is good to extend the life of consumables.

Bestseller No. 2

24 Reviews

DURATECH Plasma Cutter, 40Amp Non-Touch Pilot Arc Plasma Cutting Machine with 120V/240V Dual Voltage IGBT Inverter, Digital Display and 50A to 15A Plug Adapter, Plasma Cutting Equipment 1/2" Clean Cut

【NON-TOUCH PLASMA CUTTER】This plasma cutter can effectively cut rough, painted, rusted metal with less slag. Pilot arc technology allows you to cut without touching the tip to the metal for better cutting quality and a longer consumable life
【POWERFUL CLEAN CUT】Automatic dual voltage 120V and 240V for the wide use of light-duty work and heavy-duty construction site work. 1/2" clean cut thickness and 11/16" maximum severance cut thickness under 240V
【LIGHTWEIGHT AND PORTABLE】This compact plasma cutter is 14-3/8" L * 8-5/8" W * 6" H and weighs 14.4 lbs, making it easy to use in different environments. Lightweight for both men and women. Beautiful design, ideal gifts!
【WIDE CUTTING ABILITY】This 40 amp professional plasma cutter is suitable for cutting aluminum, magnesium alloys, brass, stainless steel, cast iron, steel, copper, copper, titanium, and other metal materials. It is very friendly to both DIY, beginner cutter, and professional workers
【ADDED SAFETY】This non-touch pilot arc plasma cutter is certificated by CSA and the power cord is UL listed, automatic compensation for voltage fluctuation, over-current protection, overload protection, and temperature control. Please try with confidence. Any problems, please feel free to get in touch with us

Bestseller No. 3

Lotos LT3500 35 Amp Air Plasma Cutter, 2/5 Inch 10 mm Clean Cut, 110V/120V Input with Pre Installed Air Filter Regulator with NPT Quick Connector, Brown

PORTABLE but POWERFUL--the LT3500 can easily cut 4/9”(10 mm)metal with ultimate portability weighing only 18lbs; The LT3500 is an excellent choice for home DIY jobs and light duty small business projects.
★ QUICK Setup--the per installed NPT 1/4” industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connected to your existing 110v wall outlet. The whole machine can be setup quickly within 1 mins.
★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 35 A input; Automatic dual frequency (50/60Hz); 15-35 A DC output, 4/9” ideal clean cut and 3/5” maximum severance cut
★ SUITABLE CUTTING--for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and low cost. ★ PACKAGE INCLUDES--power supply, cutting torch, consumables, ground clamp PRE INSTALLED Air Filter Regulator.
★ ???????????????????????????????? ???????????????????????????????????? ????????????????????????????: we offer a ???????? ???????????? ????????????????????-???????????????? ???????????????????????????????????? and ???? ????-???????????????? ???????????? ???????????????????????????????????????????? ???????????????????????????????? along with a ???????????????????? ????-???????????????? ???????????????????????????? ???????????????????????????????? covered by our US based lifetime technical support. To avail the warranty, please submit the warranty registration form on our website. ???????????? ????????????-???????????????????? dedicated customer service team is readily available to assist you through phone or email.

Bestseller No. 4

LOTOS LTP5000D Plasma Cutter, 50 Amp Non-Touch Pilot Arc Plasma Cutter Machine, 5/8 inch Clean Cut 3/4 inch Severance Cut, Dual Voltage 110/120V or 220/240V, Brown

★ ???????????????????????????????????????? ????????% ???????????????????????????????? ???????? ???????????????????????????? ????????????????????: 5/8" Clean Cut. Enhanced with ???????????????????????????????????????? ???????????????????? on LOTOS ???????????????????? ???????????????????????????????? ???????????? ???????????????????? & ????????????????????, delivering a remarkable 25% increase in cutting power output compared to standard 50-amp plasma cutters. The advanced control systems and precision cutting flames of the newly designed torch ensure high-precision cuts with smooth and fine cut lines. Experience faster cutting speeds without compromising accuracy.
★ ???????????????? & ???????? ???????????? ????????????????: Newly designed upgraded torch and consumables guarantee enhanced precision cutting and increased durability, leading to a much longer consumable lifespan. ???????????????? ???????????????????? ???????????????????? ???????????????? ???????????????????????????? ???????????????????? ????????????????????. The compact plasma cutter features a convenient handle for portability, and it utilizes non-hazardous compressed air to effortlessly cut through various materials, including stainless steel, alloy steel, mild steel, copper, and aluminum.
★ ???????????????? ???????????????????? ???????????????????????? ???? ????????????????????????: The pre-installed NPT 1/4" industry-type D plug and air filter regulator enable seamless connection to your air compressor using the existing stand coupler. Setting up the entire machine is effortless and can be completed within 1 minute. ★ ????????????????????-???????????????????????????? ????????????????????????????????????: Emphasize the significance of pressure adjustment for attaining precise cutting. Ensures a 100% Air Leakage-Free Guarantee.
★ ???????????????????????????????? ???????????????????????????????????? ????????????????????????????: we offer a ???????? ???????????? ????????????????????-???????????????? ???????????????????????????????????? and ???? ????-???????????????? ???????????? ???????????????????????????????????????????? ???????????????????????????????? along with a ???????????????????? ????-???????????????? ???????????????????????????? ???????????????????????????????? covered by our US based lifetime technical support. To avail the warranty, please submit the warranty registration form on our website. ???????????? ????????????-???????????????????? dedicated customer service team is readily available to assist you through phone or email.
★ ????????????-???????????????????? ???????????????????? ???????????? ???????????????????????? ????????????????????????: Effortlessly cuts through rough, painted, and rusty surfaces while generating minimal slag. The pilot arc technology enables cutting without direct contact between the tip and the metal, resulting in improved cutting quality and extended consumable lifespan.
★ ???????????????????????? & ????????????????????????????????????????????: 10-50A DC output, 5/8” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 3/8" ideal clean cut and 1/2" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
★ ???????????????????????????? ????????????????????????????????: Power supply, Plasma cutting torch, ground clamp, Pre-installed NPT 1/4” industry type D plug and Air filter regulator, consumables, Instruction Manual, etc.

Bestseller No. 5

Reboot Plasma Cutter, 60Amps Plasma Cutter Machine with 120V 240V Dual Voltage, Digital IGBT Inverter Power Plasma cutters 1/2 Inch Clean Cut New Upgrade RBC6000D

【POWERFUL PERFORMANCE】With advanced IGBT inverter technology, the maximum severance cut can reach up to 3/4" (20 mm), 1/2" (12mm) ideal clean cut, 60% duty cycle. The recommended current is 60A, the recommended psi is between 30-50psi (0.21-0.35Mpa) when connecting 120V, the recommended psi is between 30-70psi (0.21-0.49Mpa) when connecting 220V.
【DUAL VOLTAGE】 Automatic dual-voltage 120/240V. It allows the machine to run directly on 240 V 50/60 Hz power or on 120 V 50/60 Hz with the use of a power adapter, without removing the covers to relink the power source. Suitable home DIY and industrial projects.
【WIDE CUTTING ABILITY】This 60 amp professional plasma cutter is suitable for cutting aluminum, magnesium alloys, brass, stainless steel, cast iron, steel, copper, copper, titanium, and other metal materials. It is very friendly to both DIY, beginner cutter, and professional workers.
【PORTABLE & LIGHTWEIGHT】Portable in the shop or at the job site, this plasma cutter machine only weighs 10.6 pounds, easy to carry. Package weighs 18.26 pounds. It allows the end user to easily move from location to location.
【STABLE and DURABLE】RBC6000D provides maximum customer convenience by automatically controlling the arc when cutting expanded metal or multiple pieces of metal. When cutting expanded metal, the ignition arc quickly switches as needed and provides maximum power for cutting thicker metal - all automatically No manual re-triggering is required, reducing user hand fatigue.
【WARRANTY from Reboot】We provide 30-Day Money Back Guarantee and 1-Year Warranty for you. 7 day per week support in USA.

Bestseller No. 6

FLARING Digital Plasma Cutter, 55 Amp Non-Touch Pilot Arc Plasma Cutter Machine, 1/2 inch Clean Cut 3/4 inch Severance Cut, Dual Voltage 110/120V or 220/240V

????【NON-TOUCH PILOT ARC PLASMA CUTTER】FL550D has the pilot arc function. It is a high frequency non-touch arc starting mode. Effortlessly cuts through rough, painted, and rusty surfaces while generating minimal slag. The pilot arc technology enables cutting without direct contact between the tip and the metal, resulting in improved cutting quality and extended consumable lifespan.
????【EASY TO CUT, HIGHLY EFFECTIVE】Automatic dual-voltage 110/220V or 220/240V With advanced IGBT inverter technology, the maximum severance cut can reach up to 3/4" (20 mm), 1/2" (10mm) ideal clean cut, 60% duty cycle. Suitable for alloy steel, stainless steel, mild steel, copper, aluminum, etc. The recommended current is 50A, the recommended psi is between 20-40psi when connecting 110V, the recommended psi is between 30-60psi when connecting 220V.
????【READY TO WORK】It takes only 30 seconds to start cutting. The quick air coupler that matches the air hose is already installed inside the machine and takes only a second to install, so all you need to do is get the air compressor ready. It's very beginner-friendly.
????【BUY WITH CONFIDENCE】we offer a 30 day money-back guarantee and 1-YEAR warranty and life time technical support . You can get our online customer service or US local technical support anytime!
????【SAFETY & DURABLE】Newly designed upgraded torch and consumables guarantee enhanced precision cutting and increased durability, leading to a much longer consumable lifespan. The compact plasma cutter features a convenient handle for portability, and it utilizes non-hazardous compressed air to effortlessly cut through various materials, including stainless steel, alloy steel, mild steel, copper, and aluminum.
????Newly upgraded fourth generation, go and enjoy a different cutting experience with FLARING's cutting machines.

Bestseller No. 7

88 Reviews

Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120V , Brown

Built in Air Compressor
Cuts faster than oxy fuel
Smaller heat-affected zone for less warping
No gas pressure settings for flame tuning needed
More precise cut, thinner kerf, less slag to clean up

Bestseller No. 8

Plasma Cutter, Max Cutting Thickness 20MM, 50A Inverter DC Inverter 110/220V Dual Voltage Cutting Machine with Free Accessories Easy Cutter Welder

????★Portablet Plasma Cutter Has A Handle For Portability And Uses Non-hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper,And Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag; Better Cutting Quality And Longer Consumable Life.
????★50 Amp 85%-100% Digital Inverter Air Plasma Cutter,Smart Wide Voltage 90~260V, 50/60Hz(With Converter Power Cord) 20-50A AC- DC Output, 1/2” Ideal Clean Cut And 3/4” Maximum Severance Cut Under 220/240V. 20-50A DC Output, 1/3" Ideal Clean Cut And 2/5" Maximum Severance Cut Under 110/120V. Suitable Cutting For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc. Uses Non-hazardous Compressed Air To Cut, Safe And At Low Cost.
????★Package Includes:1 x Plasma Cutter (Fixed 220V Power Plug) 1 x 4M S7 Universally Cutting Torch 1 x High-Quality Air Regulator 1 x 240V To 120V Power Plug Adaptor Conversion Cord 1 x Earth Clamp 20PCSx Plasma Cutting Consumables Common 1 x Manual（Air Compressor Start Required）
????★Automatic Dual Voltage / Dual Frequency (110/230 V 50/60Hz).Long Term Supply Of Consumables On S7 Shop.
????★ HOLA,Buy With Confidence: We Offer 3-years Warranty, Please Submit Registration Form on Our Website.

Bestseller No. 9

YESWELDER 55 Amp Plasma Cutter Non-High Frequency, Screen Display Non-Touch Pilot Arc, Digital DC Inverter 110/220V Dual Voltage Cutting Machine CUT-55DS Pro

[NON-HF START] The ''blow-back'' start comes without interference and is safe and ideal for general use, friendly to the surrounding electrical machines and human health.
[DIGITAL DISPLAY]: The screen centrally displays parameters such as air pressure, voltage, current, etc., allowing users to understand the status of the equipment in real time, adjusting the operation in a timely manner, and improving the efficiency of the operation. If the plasma cutting machine can not work, there will be an error code system on the screen, it is easy to find the problem.
[CLEAN CUT] CUT-55DS PRO adopts the international leading MCU intelligent digital control technology, all the main components are realized by software.CLEAN CUT: 1/3''@110V 1/2''@220V // MAX CUT: 1/2''@110V 4/5''@220V.
[PT/2T/4T FUNCTION]: Post time function, adjustable from 5-20 seconds. Adjust the cooling time of the welding head to extend the life of consumables. Generally, we recommend a cooling time of 5-8 seconds. 2T/4T auto cut releases your fingers. 2T is a semi-automatic cutting control, 4T is an automatic cutting control.
[AIR FILTER REGULATOR] There is an air pressure sensor inside the machine, users can adjust the air pressure by the regulator. The air filter is mounted at the rear of the machine, which allows for quick connection and saves installation time and improves efficiency.
[NON-TOUCH PILOT ARC] The pilot arc IPT40 torch has better cutting performance, which efficiently cuts through rough, painted, and rusty surfaces, while producing minimal slag.

Bestseller No. 10

Herocut Plasma Cutter, 35Amp Plasma Cutting Machine, HF 50/60Hz Invert Technology Plasma Cutter, Max Cutting Thickness 8mm (CUT35 110V)

✤ Plasma Cutter, 110V 35A cutting machine with IGBT inverter technology, It is long life and efficient higher than mosfet machine.
✤ Very good to cut car flame, Clean cutting thickness 6mm Max cutting thickness 10mm,Machine only work in 110V not 220V, Please confirm the voltage before buying this machine. Machine maybe explode if connect it to 220V, Be careful~!
✤ This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current, these functions are great to help the user cut any metal.
✤ The plasma cutter easy to cut stainless steel, alloy steel, mild steel, Copper,aluminum etc. witgh Quality cutting torch PT31 plasma torch, Max cutting thickness is 8mm at 35Amps 110V 50PSI
✤ Machine come with 110V power plug.1 x 4 meters Cutting torch, 1 x2 meters Earth clamp, 1 x 2 meters Air Hose, 1 x Air filter,2 x Tip (Nozzle), 2 x Electrode, 2×hose clamp,1 x Manual

Last update on 2024-04-28 / Affiliate links / Images from Amazon Product Advertising API

Conclusion

So, which are the best 120v plasma cutter to get right now?

Hope, you have found this list helpful to decide on.

Then, why are you waiting for?

Pick the right one from this comprehensive list to meet your needs.

Ivan D. Mitchell

I’m Ivan D. Mitchell. I’m the Chief Engineer, Manufacturing Engineering Tool and Launch, specialising in automotive equipment design and build which meets World Class Manufacturing methodology. I have 15 years of work experience as a Tooling Specialist on some of the leading automotive manufacturing companies. When I launched this site, I wanted to create a platform where you’ll get everything about tools in one place. I also wanted to share my experience in the tool industry. I’ll do my best to share the information you need to truly make your tool using experience better. I hope you find our guides, reviews, information HELPFUL. If you have any inquiries, I’m always here to help you.