7 Best CNC Plasma Cutters- In-depths Reviews

What are the best CNC plasma cutters to help your business grow?

You’ll find out here.

A CNC table is one of the coolest tools you can have in your garage. But many tables don’t come paired with a plasma cutter. So, you’ll need to buy a plasma cutting machine designed to work with CNC tables.

Our team of experts has done all of the in-depth research and testing on the best plasma cutters made specifically for CNC tables. So, you don’t need to waste countless hours trying to find the industry-best CNC plasma machines for your needs.

We made the most detailed list of the best CNC-compatible plasma cutters of the leading manufacturer that you can trust.

No matter which one you choose from our CNC plasma cutter reviews below; you’ll end up with a model that offers quality cutting at affordable rates and much more.

Read on!

What feature should have a CNC-enabled plasma cutter?

Not all plasma cutting machines can work with a CNC table. The plasma cutter should be equipped with an interface port to ensure that the CNC table can communicate with the cutter.

Our Recommended 7 Best CNC Plasma Cutters Reviews

With a host of options at your disposal, finding the best plasma cutter for CNC tables can be stressful.

But don’t worry. There’s a solution.

We’ve tried our best to help you make the right buying decision through our highly resourceful reviews. Here we’ve short-listed some highly reliable and reasonably priced models for you.

We’ve tested them vigorously before compiling the list so you can pick them confidently.

Without wasting much of your time, let’s go through.

#1 Hynade CUT60DN CNC Blow Back Digital Air Plasma Cutter- Best Overall

Non-HF Pilot Arc Non-Touch, THC Torch Height Control Enabled

Specs

• Max Cutting Thickness 25mm@55A 220V 70PSI
• Clean cutting thickness 20mm@55A 220V 70PSI,
• Clean Cutting thickness 12mm under 110V 60PSI.
• Input voltage: AC110/220V+/-15%
• Output current: 55Amps Rated input capacity: 8.6 KVA
• Output Current range: 15A-55A
• Efficiency: 85%
• Duty cycle: 60%@55Amps 75℉
• Cutting speed: 200mm/min at 20mm thick metal 70PSI (Air Pressure)

Best uses for: stainless steel, mild steel, alloy steel, copper, iron and aluminum metal etc.

Top Features

• HF Arc starting: Non-HF Pilot Arc, Non-Touch metalDual voltage 110V/220V (working power range from 100V to 250V)
• 2T/4T Function
• THC torch height control enabled
• 2 pins and 4 pins connecting port at the rear of the machine
• IGBT soft watch technology
• With CNC port connector, easy to work with CNC system
• Installed air gauge regulator air filter
• Fan cooled ensuring better performance and durability

Hynade CUT60DN stands out because of the technology it comes with. It is an excellent dual voltage plasma cutting machine. It’s a perfect choice for home jobs DIY and light duty small business projects.

This machine is perfect to cut 20mm standard mild steel, 4mm copper, 16mm stainless steel, 16mm Alloy steel, 8mm Aluminum under the rate 220V 55Amps 60-75PSI. Of course, the cutting thickness may differ depending on different air pressure and voltage current.

The blowback arc starting eliminates the HF interference. It works easily with a CNC plasma cutting table.

The torch will have an arc without touching the metal surface making it perfect to cut rusted and painted workpiece.

Conveniently, there are 2 pins and 4 pins connecting port on the back of the unit making it easy to work with CNC cutting table.

Another impressive feature of this unit is- the air gauge regulator air filter come installed on the machine.

It is a powerful cutting machine with good performance, so you can use it for light to medium-duty tasks in factories.

What In The Box

1 x Plasma Cutter (Machine)
1 x Earth clamp with cable (3 meters)
1 x 5 meters Cutting torch (IP65 Non-HF Blowback air Pilot arc, use IPT65 Consumables)
1 x 2 meter Air Hose
2 x Electrode
2 x Hose Clamp
2 x Tip (Nozzle #1.0)
1 x 2 pins Connector
1 x 4 pins Connector
1 x Manual

Pros

• Great for the CNC cutting table
• Suitable to cut different materials
• Simple to operate
• Smooth cutting surface
• Durable; can be used in factories

Cons

• Nothing found

#2 PRIMEWELD CUT60 Plasma Cutter- Best for Metal Art

Specs

• Max cutting thickness: 20mm
• Output Current: 60A
• Duty cycles: 60% @60A
• Air consumption: 5cfm at 90 psi
• Torch length: 20 feet

Best uses for: stainless steel, alloy steel, mild steel, copper aluminum, and many other types of metal materials.

Top Features

• Dual-voltage 110V/220V with adapter
• Blow-back start technology, Pilot Arc
• IGBT technology
• Euro Central Connection
• PT60 blowback cutting torch included

The PrimeWeld CUT60 is a modern and versatile CNC-compatible plasma cutter. It’s perfect for both home/hobby use and industrial/construction work and. What’s more, you can use it to create artistic patterns in metals. If you have large volumes of welding work, CUT60 can be a sensible move.

It’s specifically designed for producing top-notch cuts. The main benefit of this system is it offers fine-quality cuts, easy to operate, and fast turnaround time. Usefully, the non-touch pilot arc enables you to cut expanded, painted, or rusted metals.

Accuracy is one of the greatest benefits of using this inverter plasma cutting machine. This model is a CNC machine compatible that guarantee fine cutting edges and accuracy. Conveniently, CNC port on the unit and adapter plug included.

Overall, it’s the best value plasma for CNC.

What In The Box

1x IPT60 Plasma Torch (20 ft.)
1x CNC Plug
1 x 220V to 110V Pigtail Adapter
1x Wire Brush
1x Ground Clamp
1x Welding Helmet Extra Consumables

Pros

• CNC ready, user-friendly operation
• Low Power Consumption
• Produce accurate and fine cuts
• Lightweight and highly portable
• Built to last
• Backed by 3 Year Warranty
• Nice Comprehensive Manual

Cons

• The included welding helmet is not of good quality

#3 Lotos Plasma cutter, 55AMP CNC- Best for Light-Duty Projects

Specs

• Input Voltage: 110 V/220 V
• Frequency: 50/60Hz
• Output Current: 20-55A
• Duty cycle:   60% @ 55 A/132 V
•                           100% @ 40 A/119 V (Under 220/240V)
•                           100% @ 35 A/119 V (Under 110V/120V)
• Ideal Cut Thicknes: 3/5″(15mm)
• Max Rated Clean Cut Thickness: 3/5″
• Severance Cut Thickness: 1″ (25mm)

Best uses for: Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc.

Top Features

• Pre-installed CNC Interface
• Blow-Back non-high frequency start
• Non-Touch Pilot Arc
• Latest IGBT Inverter Technology
• 2T/4T Function enabled.
• Digital Control
• THC Torch Height Control
• 14ft torch with Euro-type Central connector
• Automatic Dual Voltage (110/120 220/240 V) & Dual Frequency

LTP5500DCNC is an excellent choice for light-duty small business projects and home DIY jobs.

One of the most useful features of this model is its non-touch Pilot arc technology. It allows you to cut efficiently without touching the torch tip to the metal. It ensures not only better-cutting quality but also a longer consumable life.

Conveniently, it helps to efficiently cut through painted, rough, and rusty surfaces. What’s more, it produces minimal slag. It’s perfect for CNC applications.

The Pre-installed CNC Interface with THC signal output makes it ideal for CNC and general use. The blowback that allows high-frequency to start is great for CNC machines. 

What In The Box1x IGBT Inverter power supply1x Cutting Torch (20ft)1x Ground Clamp1 x Quick Connector1x Pre-Installed Air Filter RegulatorConsumables

Pros

• Powerful and reliable
• High performance
• Quick and easy set up
• Automatic voltage adjustment
• Quick connect to air compressor
• Improved consumable life

Cons

• Expensive consumables

Best IGBT Plasma Cutter

#4 Everlast Welders 2021 PowerPlasma 52i 50 Amp CNC Compatible Plasma Cutter

Specs

• Max cutting thickness: 5/8-inch
• Severance cut thickness: 7/8- inch
• Clean cut thickness: ¾ inch

Best uses for: Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc.

Top Features

• Ergonomic and flexible NEW upgraded IPT-60 torch
• Gouge Function
• Blow-back start technology, Pilot Arc
• Dual Voltage (110V/220V)
• T2/T4 TIP saver option
• CNC port for light gauge CNC use
• Adjustable Post Flow timer of up to 60 seconds
• Euro style “Central” quick connect torch adapter
• Air-pressure guide system
• Digital control over post-flow
• Large digital display
• Air pressure regulator (front mounted for easy adjustment)
• Air pressure gauge (front mounted for easy monitoring of air pressure)
• OverCurrent indicators and auto interrupt to protect the machine

Powerplasma 52i is redesigned for better performance, offering full digital design- inside and out. It is the successor to the popular PowerPlasma 50S series.

Considering the long-term operating costs and initial cost, 52i is certainly one of the best performing IGBT plasma cutters for any light industrial setting. This model has improved reliability and reduced circuit complexity.

The new addition of 52i is an air-pressure guide system that offers a digital display of actual air pressure. In addition, the LED system guides the user to the best choice of air pressure for the mode being used.

Another impressive aspect is the digital control over Post-Flow. It gives you the ability to see and set the actual post flow time with a digital readout. You can also adjust it for different duties and job requirements.

What’s more, you can easily increase the Post-Flow to preserve the consumable life for those time consuming, long cut. Again, you can adjust the post-flow to lower for short, rapid or intermittent cuts. And all you can do by just a quick twist of the dial.

You’ll appreciate the large digital displays that are super bright for improved visibility, making them easy to read at a distance.

The PowerPlasma 52i comes with the impressive gouge feature and a separate mode for CNC use.

The blow-back torch design of this model offers two pilot arc modes. One mode has continuous re-light for cutting expanded metal and for conditions where continuity is not ideal. The other mode features a tip saver function that limits pilot arc on time to preserve consumable life.

The Everlast PowerPlasma 52i offers plenty of capability for hobbyists, small shops, home garages, and even for most fabrication facilities.

It also comes equipped with a standard CNC interface for a plasma table at no additional cost!

What in The Box

1 x iPT 60 torch(15 ft.)
1 x Air Pressure gauge
1 x Water trap (this is not an air dryer)
1 x Consumable starter kit
1 x Work clamp

Pros

• Professional cutting power
• Exceptionally clean smooth cuts
• Excellent consumables- and torch life
• Inexpensive consumables
• Interchangeable consumable with several different brands
• Compact, lightweight and easy to carry

Cons

• Several customers are not satisfied with the customer care service.

#5 SPRIGHOLLY ‎NHP5500D Plasma Cutter CNC

50Amp, Non-Touch Pilot Arc, Low-Frequency 110V/220V Dual Voltage, 1/2″ Clean Cut, 3-year warranty

Specs

• Input voltage: 110 V/220 V
• Current adjustment range: 110V:15-40A, 220V:15-50A
• Voltage adjustment range: 94V@110V±15%, 98V@220V±15%
• No-load voltage 280±20V@110V, 280±20V@220V
• Output Current: 10-55 A
• Duty cycles 60% @ 50 A
• Ideal cut thickness: 1/2″(12mm)
• Severance cut thickness: 1″(25mm)
• Rated power capacity: 5.15KVA @110V; 6.9KVA@220V
• Efficiency: 80%
• Power factor: 0.7
• Protection class: IP21S
• Insulation class: F

Best uses for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc.

Top Features

• Automatic 110/220V DC dual voltage
• Non-HF blowback start
• Non-touch low frequency pilot arc
• CNC enabled pre-installed CNC Interface with signal output
• Built-in automatic drain air regulator
• Robust ground clamp with modern 9 mm pin connection

The SPRIGHOLLY NHP5000D is an Inverter CNC plasma cutting machine perfect for metal crafts. It is so user-friendly that you won’t need any experience or special skills to operate it.

Installation of the machine is quick and simple. Thanks to its pre-installed plug and air filter regulator. You can quickly connect to your air compressor It will be more convenient than an external air filter regulator.

NHP5000D is ideal for both general use and CNC system. Its has Blow-Back non-high frequency start. So, it is reliable and won’t interfere with your CNC computer system.

Best of all is the non-touch pilot arc technology of the torch that lets you cut without touching the metal. It makes the unit perfect to cut through rusty, painted, and rough surfaces. This feature ensures better cutting quality and longer consumable life.

Overall, it is a good bang for the buck.

What In The Box

1 X plasma cutter
1 X Earth clamp 9.8 ft
1 X AG60 cutting torch (16 ft) with consumables
1 X 220V to 110V conversion line 0.65 ft
1 X Welding gas hose 12 ft
1 X User guide

Pros

• Ideal for both CNC and general use
• Easy to start and keep lit
• User-friendly interface
• Ideal for top-notch cuts
• Easy to operate in terms of settings
• Fast turnaround times
• Safe for use without interference on the CNC computer system
• Perfect for cutting rough, painted, and rusty surface
• Easy setup within 1 minute
• Lightweight and portable
• Built to last

Cons

• It makes a slightly wider cut.

#6 Everlast 2020 PowerPlasma 82i 80 Amp CNC compatible plasma cutter, PP80S- Best for Any Metal

Specs

• Max cutting thickness: 25mm
• Input voltage Frequency: 50/60Hz
• Output Current: 20-60A
• Duty cycles (35℃): 60% @ 60Amp, 100% at 50amp
• Ideal cut thickness: 16mm (with 220V, 65psi)
• Severance cut thickness: 25mm (under 220V)
• Clean cut thickness: ¾ inch
• Input power voltage: 220V±15%
• Rated input power capacity: 11 KVA
• No-load voltage: 273 V
• Rated output voltage: 120V

Best uses for any type of metal

Top Features

• BLOWBACK IPT-80 plasma torch
• IGBT Inverter technology
• Post flow adjustable control
• Front air pressure adjustment
• Front mounted air pressure gauge
• Over Current and Air Pressure light indicators 

2020 PowerPlasma 82i is a well-made and powerful CNC plasma cutter. It can cut any type of metal with ease. And it offers exceptionally smooth and clean cuts.

One of the best benefits of this unit is it features are easy, starting with a pilot arc that allows easy cutting of painted and rusty metals.

Additionally, the torch is simple to use and the required service parts and consumables are inexpensive. This bad boy comes with a plug for the CNC port.

Pros

• Comes as a Combo Set
• Easy starting with pilot arc
• Cuts virtually any type of metal with ease
• Easy cutting of rusty and painted metals
• Simple to use torches
• Inexpensive consumables
• Improved consumable and torch life
• Easy and painless pressure adjustment

Cons

• No drawbacks found.

#7 Hookey Cut60, 60A DC IGBT CNC Plasma Cutting Machine- Best Portable Plasma Cutter

110V/220V dual voltage, LCD display, AG60 plasma cutting torch and accessories tools

Specs

• Input power supply voltage: 110/220V（±15%）
• Cutting current: 10 – 60A
• Dual frequency 50/60HZ
• Best cutting thickness: 3/4″ (14-18mm) at 250V
• Maximum cutting thickness: 4/5″ (20-22mm) at 250V

Best uses for stainless steel, alloy steel, mild steel, copper, and other metal materials.

Top Features

• Updated IGBT inverter technology for reduced dimensions and weight
• Efficient cooling system
• Thermal overload protection
• Easy to read LCD display on the front panel
• Ergonomic and durable handle

Hookey Cut60 is one of the latest and most affordable plasma cutting machines available. For doing some lighter tasks, it’s a nice choice. Conveniently, it’s CNC compatible.

It automatically adapts to dual voltage 110V/220V (±15%) dual-frequency 50/60HZ. The transmission efficiency is higher than 85%.

You’ll appreciate its updated IGBT inverter technology that significantly reduces the power required for cutting. It also increases the efficiency by 30%. At the same time, it provides a constant power supply and a more stable cutting arc.

The well-thought design has an efficient cooling system to protect the machine from damage. There is a powerful cooling fan on the rear and holes on both sides of the housing for cooling.

Importantly, the thermal overload protection enables it to withstand a rough job site. It also automatically shuts down when airflow is obstructed or the duty cycle is exceeded. Thus, it prevents the unit from damage.

With only 15 pounds of weight and an ergonomic handle, Hookey Cut60 is portable in store or job site. You can easily move it from one place to another.

What In The Box

• 1 x cut-60 plasma cutting machine
• 1 x ag60 cutting torch
• 1 x oil-water separator
• 1 x grounding clip
• 1x air hose and gadgets
• 3 sets of consumables
• 1 x manual

Pros

• Practical and convenient
• Handy, lightweight and highly portable
• Fast and economical
• Automatically adjusting voltage
• Cutting smoothly and no polish demand
• Pretty inexpensive
• 12-month limited warranty
• Pretty inexpensive

Cons

• Struggles to cut 3/8-inch mild steel clean

So, what are the best CNC plasma cutters to get in this year?

Our resourceful CNC plasma cutter review finally comes to an end.

There you get the top 7 CNC plasma cutters this year. Any of this model reviewed above will likely be a good option for your CNC table.

All the information we added is absolutely accurate, unbiased, and trustworthy and picked up from authoritative and reliable sources.

I hope, you’ve found the system that matches your exact specifications.

Thanks for reading our review.

Ivan D. Mitchell

I’m Ivan D. Mitchell. I’m the Chief Engineer, Manufacturing Engineering Tool and Launch, specialising in automotive equipment design and build which meets World Class Manufacturing methodology. I have 15 years of work experience as a Tooling Specialist on some of the leading automotive manufacturing companies. When I launched this site, I wanted to create a platform where you’ll get everything about tools in one place. I also wanted to share my experience in the tool industry. I’ll do my best to share the information you need to truly make your tool using experience better. I hope you find our guides, reviews, information HELPFUL. If you have any inquiries, I’m always here to help you.