2 Best Cordless Roofing Nailers & Reviews

Need a nail gun to repair roof sheds, install skylight, or repair shingles? But want to avoid the hassle of dragging hoses at a height?

Then, a cordless roofing nail gun is the game-changer for projects that use softer materials or shallower depths. It beats all of those pneumatic models when it comes to mobility or portability.

The cordless variation eliminates the necessity of dragging compressors and air hoses while doing catwalks on the job. It is also very handy for a quick repairing job as you don’t need to prep up your compressors to get the job done.

If you are shopping for the best cordless roofing nailer, your hunt stops right here. We have compiled a list of two models the market has to offer.

From our cordless roofing nailer review, we are 100% sure that you’ll find the right one that meets your roof-nailing needs.

2 Best Cordless Roofing Nailers- Comparison Chart

Check out the following table to compare all the essential specs of our reviewed best cordless roofing nailers quickly.

2 Best Cordless Roofing Nailer Reviews

These are the two guns that we’re going to review below:

1) Milwaukee 2909-20

2) DeWALT DCN45RND1

Let’s see what our shortlisted models do.

#1 Milwaukee M18 FUEL Coil Roofing Nailer, Tool Only

📦 Quick Look at the Specs

• Power Source: Cordless – Uses M18 REDLITHIUM™ Battery
• Nail Type: 15° Coil Roofing Nails (0.75″ to 1.75″ long, ~3 mm diameter, 10.1–10.5 mm head diameter)
• Magazine Capacity: Up to 120 nails
• Firing Modes: Sequential and Bump Fire
• Firing Speed: Up to 6 nails per second
• Nails Per Charge: Up to 1,100 nails (with HIGH OUTPUT™ CP3.0 battery)
• Tool Weight: 7.3 lbs (tool only), 8.6 lbs (with M18 3.0Ah battery)
• Depth Adjustment: Tool-free depth dial with 10 detents

Best For:

Asphalt and fiberglass shingles, Roof repairs, Quick patch jobs

If you’ve ever hauled around hoses and noisy compressors on a roof, you know how frustrating it can be. I’ve been roofing for years, and honestly, it gets old fast.

But everything changed when I tried the Milwaukee M18 FUEL Coil Roofing Nailer. No cords, no hassle—just grab it and go.

If you’re after a cordless nailer that works like a pro-grade tool (without all the bulky gear), this one’s a total game-changer. Let me share what it’s really like to use it.

👀 Why I Picked This Nailer

After dealing with leaky compressors and dragging hoses across steep pitches, I was desperate for a simpler setup—something cordless, powerful, and job-site tough.

I’ve always trusted Milwaukee, and when I saw the M18 FUEL Coil Roofing Nailer, I knew I had to give it a try. No hoses. No cords. Just me, a battery, and the roof. That sounded like freedom.

🛠️ My Hands-On Experience

From the moment I unboxed it, I could tell this nailer was built for pros. The balance felt just right in my hand—solid, but not overly heavy. I snapped in my M18 battery, loaded a coil of nails, and went to work on a patch job for a client.

And wow—it delivered.

The sequential firing mode gave me precision with every shot. No misfires, no jams. Even when I tested it on thicker shingle sections, it didn’t flinch. It drove nails flush every time.

The tool-free depth adjustment was a lifesaver. No screwdrivers, no guessing—just a quick dial twist and I had the depth locked in.

The dry-fire lockout also saved me from accidentally wasting time and energy when I ran out of nails. Little things like that really matter on a roof, especially when the sun’s beating down.

👍 What I Liked the Most

Here’s what I really loved about using this nailer:

• 💨 Truly cordless – No hoses, no cords, nothing to trip over. Just grab it and get to work.
• 🔋 Plenty of power – It fired smoothly into both asphalt and fiberglass without missing a beat.
• 🎯 Accurate shots – The trigger gave me great control, so nails went exactly where I wanted.
• 🔧 Easy depth adjustment – I could tweak the depth with a quick turn—no tools needed.
• 🧱 Tough build – It feels solid in hand and ready for real jobsite work.

👎 What Could Be Better

No tool is perfect, and here are a few things I noticed:

• 🔋 Battery and charger not included – If you don’t already have Milwaukee M18 tools, you’ll need to buy a battery and charger.
• 🏋️‍♂️ A bit heavy with the battery – It feels a little heavier than some air nailers, but I didn’t get tired using it.
• 🏠 Not great for huge jobs – If you’re doing big roofs all day long, you might need extra batteries or a faster air nailer.

🙋‍♂️ Who This Is Perfect For

This nailer is a great pick if you’re:

• 🔨 A remodeler doing small repairs or patch jobs
• 🏡 A DIYer who wants pro results without buying air tools
• 👷 A roofer who needs a fast, easy tool for quick repairs or solo work

If that sounds like you, the Milwaukee M18 Roofing Nailer is totally worth it. It saves setup time, feels easier on your arms, and helps you get the job done faster—especially for small to medium jobs.

✅ Final Verdict: Does It Belong on the “Best Cordless Roofing Nailers” List?

Yes—100%!

The Milwaukee M18 FUEL Coil Roofing Nailer worked great for me. It’s fast, easy to use, and super handy without cords or air hoses.

It takes all the annoying parts of old nailers and makes them way better.

It might not be the only tool you need for big, full-roof jobs—but for most tasks, it’s one of the best cordless roofing nailers I’ve ever used.

If you want freedom, power, and pro results, this one’s totally worth it.

❓ Quick FAQ About the Milwaukee M18 FUEL Roofing Nailer

Q: Does it come with a battery and charger?
A: No—it’s sold as a “tool only” model. You’ll need to buy M18 batteries separately (or use ones you already own).

Q: How many nails per battery charge?
A: With a fully charged 5.0Ah battery, I got through nearly two full bundles of shingles—pretty impressive for cordless!

Q: Is it suitable for full-roof jobs?
A: It’s excellent for sections, repairs, and medium jobs. For full tear-offs, you might need extra batteries or a pneumatic backup.

Q: Can I use any brand of coil nails?
A: It works best with standard 15-degree coil roofing nails up to 1-3/4″.

#2 DeWALT DCN45RND1 20V 15 Degrees – Best Battery-powered Coil Roofing Nailer Kit

Specs

DeWALT DCN45RND1 is a cordless coil roofing nailer kit. It has a powerful motor and offers longer runtime and industry-leading versatility.

This battery-powered gun gives you the freedom you’ve always dreamed of. And there is absolutely no need for compressor, hose, or gas cartridges. So, you can get to work right away. What’s even better it makes climbing the ladder for roof repair easier without the hose dragging behind.

This gun is perfect for all your roofing needs, including asphalt shingles. It can drive roofing fasteners from 3/4 inch to 1-3/4 inch.

20V MAX DCB203 2.0 Ah battery powers this gun to fire up to 3 nails per second. You can expect to drive 500 nails per charge. Roughly, you can install up to one square (100 square feet) of asphalt roofing shingles per charge.

Its 15-degree canister holds up to 120 wire collated roofing nails. To complete your roof nailing efficiently, this bad boy comes with several features.

First of all, its bump actuation mode ensures efficiency and productivity.

Secondly, tool-free depth adjustment provides precise placement for driving recessed fasteners.

Thirdly, the no-tool nail tray allows you adjust to accommodate the full range of roofing fasteners.

Finally, the stall release lever (tool-free) helps to return the driver blade in the event of a jam.

For getting into the job, you need to adjust the nail depth. With DCN45RND1, nail depth adjustment is easy to manipulate. The adjustment knob is on the top, which makes it easy to access. Moreover, it has three positions to click into. What’s more convenient, the knob is easy to grip even if you’re wearing gloves. The ergonomic handle ensures better control and comfort.

Amazingly, DCN45RND1 has three magazine positions. To set it, you’ll need to rotate the tray out, then push it to the position you need. Rotate it back in, and you’re done. The magazine can hold up to 120 nails.

Its brushless motor is powerful and provides a longer run time and tool life. It also features steel skid plates with rubber inserts that protect the tool and prevent it from sliding. The carbide nose inserts are also well-made and durable. The aluminum housing adds to the unit’s durability.

DCN45RND1 kit comes complete with one 20V MAX battery, charger, a belt hook for convenience, and a kit bag to help protect your tool.

Backed by a 3-year manufacturer warranty, including a 1-year free service contract and 90-day money-back guarantee, how much more can you ask for!

Don’t be surprised!

This battery-powered model is clearly bulkier and heavier than the pneumatic models. But it’s not going to be crazy-heavy. On the positives, the freedom of movement and quick start are the things you’ll enjoy.

To summarize: DeWalt cordless roofing nailer offers good value for money. Whether you are a DIYer or a professional contractor, we recommend this best battery-powered roofing nailer to anyone looking for cordless convenience.

Pros

• Designed for small projects and service repairs
• Powerful to fully drive roofing nails with consistent depth
• Longer runtime and long-lasting
• Easy to manipulate depth adjustment
• Low nail lockout with bypass and reload alert
• Quick and efficient with precise nail placement
• Simple and familiar nails loading
• Dual load magazine for convenience
• Compatible with all DEWALT 20V MAX batteries
• 2.0 Ah battery (1) and charger (1) included
• UL listed

Cons

• The price can be an issue for customers on a tight budget
• Flimsy magazine cover which tends to pop open
• The motor requires a second or two to spool up before it’s ready to fire
• Somewhat bulkier and heavier than pneumatic counterpart; however, it is common to any cordless nailers.

FAQs About No-cord Roofing Nailer

The following are the most common questions about this tool. If you’re still wondering about this no-cord tool, read on for answers.

Cordless Vs. Pneumatic roofing nailer: which one is the best choice?

​Both types have advantages and drawbacks. However, for larger projects, air-powered models are perfect. On the other hand, for DIY or small roofing task or punch list, battery-powered models work well. It’s worth noting that pneumatic models weigh less than battery-powered ones, so that you can use them for extended periods.

Is there any difference between a roofing nail gun and a siding nailer?

Both the tools look almost similar. Unfortunately, you can’t use both for the same purpose. Roofing nail guns use different fasteners than a siding nailer. Siding fasteners are approximately 2-1/2 inches long, while the roofing fasteners are 1-3/4-inches long. So, siding fasteners won’t fit into a roofing nail gun.

Which one is better: staples or roofing nail gun?

Staples require to be installed with the crown parallel to the length of the shingle. So, it can be challenging when maneuvering on a roof. But roofing fasteners are generally easier to install correctly. As roofing nails feature a round head, there is no hassle to orient the head.

Conclusion

Typically, battery-powered or cordless models don’t offer as much punch as pneumatic ones. But any of these above-reviewed two best cordless roofing nailers would be a nice go-to tool for some of those smaller projects that use softer materials or shallower depths.

These selected models can really do the nailing job as well as being a tool that you can count on to last for a couple of years.

Paslode fuel-powered CR175C cordless roofing nailer is a perfect option for small or large service jobs like tacking down roof underlayment or shingling valleys, roofing a dormer, or garage roof repair.

DeWalt 20V max roofing nailer is a huge timesaver for punch list work and small jobs. This model is perfect for renovation/ remodel contractors or roofing contractors who need to move along quickly and tackle small roofing jobs.

If you don’t want the hassle of running an air compressor and dragging a hose, pick any of these models according to your needs.

Who wants to trip off the roof with those cord guns?

Go cordless, Work smarter!

But Remember!

The cordless models are not going to replace your air-powered nail guns for the bigger jobs.

Thanks for reading!

Ivan D. Mitchell

I’m Ivan D. Mitchell. I’m the Chief Engineer, Manufacturing Engineering Tool and Launch, specialising in automotive equipment design and build which meets World Class Manufacturing methodology. I have 15 years of work experience as a Tooling Specialist on some of the leading automotive manufacturing companies. When I launched this site, I wanted to create a platform where you’ll get everything about tools in one place. I also wanted to share my experience in the tool industry. I’ll do my best to share the information you need to truly make your tool using experience better. I hope you find our guides, reviews, information HELPFUL. If you have any inquiries, I’m always here to help you.